添加节点

KubeCube 提供为已有集群添加节点的能力，同时也支持使用 kubeadm 的原生方式添加节点

⚠️ 注意通过 KubeCube 的脚本添加节点时，node 机器需要能够通过 ssh 访问 master 机器，支持公钥和密码两种 ssh 方式，执行脚本前可以在 node 上 ssh 到 master 测试连通性

v1.4.x

向集群添加工作节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.4

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入集群

MASTER_IP 为 master 节点 ip

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install k8s
INSTALL_KUBERNETES="true"

# k8s cni, support now is calico only
CNI="calico"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
# support now is: 1.19.13, 1.20.9, 1.21.2, 1.22.2, 1.23.5
KUBERNETES_VERSION="1.23.5"

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

# +optional
# KUBERNETES_BIND_ADDRESS generally is node_ip
# can be set when NODE_MODE="master" ot "control-plane-master"
# default value is $(hostname -I |awk '{print $1}')
KUBERNETES_BIND_ADDRESS="" #{node_ip}

#######################################################################
# member cluster config
# used when INSTALL_KUBECUBE_MEMBER="true"
#######################################################################

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

#######################################################################
# ssh config
# used when NODE_MODE="node-join-master" or node-join-control-plane
#######################################################################

# +optional
# master ip means master node ip of cluster
MASTER_IP=""

# +optional
# the user who can access master node, it can be empty
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

#######################################################################
# offline config
# used when offline install choose, must lift offline pkg first
#######################################################################

OFFLINE_INSTALL="false"

OFFLINE_PKG_PATH=""

#######################################################################
# container runtime config
# if value is docker, then use docker as container runtime
# else if value is containerd, then use containerd as container runtime
#######################################################################
CONTAINER_RUNTIME="docker"

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.4

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入 control-plane

MASTER_IP 需要填已有的 master 节点 ip
NODE_MODE 当该模式为 node-join-control-plane 时，需要指定 master 节点们的 CONTROL_PLANE_ENDPOINT(vip)
CONTROL_PLANE_ENDPOINT 为高可用 vip
可以根据需要选择适合自己的 ssh 方式

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install k8s
INSTALL_KUBERNETES="true"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
# support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
KUBERNETES_VERSION="1.20.9"

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

#######################################################################
# member cluster config
# used when INSTALL_KUBECUBE_MEMBER="true"
#######################################################################

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

#######################################################################
# ssh config
# used when NODE_MODE="node-join-master" or node-join-control-plane
#######################################################################

# +optional
# master ip means master node ip of cluster
MASTER_IP="y.y.y.y"

# +optional
# the user who can access master node, it can be empty
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

#######################################################################
# offline config
# used when offline install choose, must lift offline pkg first
#######################################################################

OFFLINE_INSTALL="false"

OFFLINE_PKG_PATH=""

#######################################################################
# container runtime config
# if value is docker, then use docker as container runtime
# else if value is containerd, then use containerd as container runtime
#######################################################################
CONTAINER_RUNTIME="containerd"

v1.2.x

向集群添加工作节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.2

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入集群

MASTER_IP 为 master 节点 ip

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install k8s
INSTALL_KUBERNETES="true"

# k8s cni, support now is calico only
CNI="calico"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
# support now is: 1.19.13, 1.20.9, 1.21.2, 1.22.2, 1.23.5
KUBERNETES_VERSION="1.23.5"

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

# +optional
# KUBERNETES_BIND_ADDRESS generally is node_ip
# can be set when NODE_MODE="master" ot "control-plane-master"
# default value is $(hostname -I |awk '{print $1}')
KUBERNETES_BIND_ADDRESS="" #{node_ip}

#######################################################################
# member cluster config
# used when INSTALL_KUBECUBE_MEMBER="true"
#######################################################################

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

#######################################################################
# ssh config
# used when NODE_MODE="node-join-master" or node-join-control-plane
#######################################################################

# +optional
# master ip means master node ip of cluster
MASTER_IP=""

# +optional
# the user who can access master node, it can be empty
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

#######################################################################
# offline config
# used when offline install choose, must lift offline pkg first
#######################################################################

OFFLINE_INSTALL="false"

OFFLINE_PKG_PATH=""

#######################################################################
# container runtime config
# if value is docker, then use docker as container runtime
# else if value is containerd, then use containerd as container runtime
#######################################################################
CONTAINER_RUNTIME="containerd"

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.2

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入 control-plane

MASTER_IP 需要填已有的 master 节点 ip
NODE_MODE 当该模式为 node-join-control-plane 时，需要指定 master 节点们的 CONTROL_PLANE_ENDPOINT(vip)
CONTROL_PLANE_ENDPOINT 为高可用 vip
可以根据需要选择适合自己的 ssh 方式

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install k8s
INSTALL_KUBERNETES="true"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
# support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
KUBERNETES_VERSION="1.20.9"

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

#######################################################################
# member cluster config
# used when INSTALL_KUBECUBE_MEMBER="true"
#######################################################################

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

#######################################################################
# ssh config
# used when NODE_MODE="node-join-master" or node-join-control-plane
#######################################################################

# +optional
# master ip means master node ip of cluster
MASTER_IP="y.y.y.y"

# +optional
# the user who can access master node, it can be empty
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

#######################################################################
# offline config
# used when offline install choose, must lift offline pkg first
#######################################################################

OFFLINE_INSTALL="false"

OFFLINE_PKG_PATH=""

#######################################################################
# container runtime config
# if value is docker, then use docker as container runtime
# else if value is containerd, then use containerd as container runtime
#######################################################################
CONTAINER_RUNTIME="containerd"

v1.1.x

向集群添加工作节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.1

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

tip: 你可以通过预先下载离线包和镜像来减少部署时间 export PRE_DOWNLOAD="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入集群

MASTER_IP 为 master 节点 ip

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install k8s
INSTALL_KUBERNETES="true"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
# support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
KUBERNETES_VERSION="1.20.9"

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

#######################################################################
# member cluster config
# used when INSTALL_KUBECUBE_MEMBER="true"
#######################################################################

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

#######################################################################
# ssh config
# used when NODE_MODE="node-join-master" or node-join-control-plane
#######################################################################

# +optional
# master ip means master node ip of cluster
MASTER_IP="y.y.y.y"

# +optional
# the user who can access master node, it can be empty
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

#######################################################################
# offline config
# used when offline install choose, must lift offline pkg first
#######################################################################

OFFLINE_INSTALL="false"

OFFLINE_PKG_PATH=""

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.1

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入 control-plane

MASTER_IP 需要填已有的 master 节点 ip
NODE_MODE 当该模式为 node-join-control-plane 时，需要指定 master 节点们的 CONTROL_PLANE_ENDPOINT(vip)
CONTROL_PLANE_ENDPOINT 为高可用 vip
可以根据需要选择适合自己的 ssh 方式

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install k8s
INSTALL_KUBERNETES="true"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
# support now is: 1.20.9, 1.19.13, 1.18.20, 1.21.2
KUBERNETES_VERSION="1.20.9"

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

#######################################################################
# member cluster config
# used when INSTALL_KUBECUBE_MEMBER="true"
#######################################################################

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

#######################################################################
# ssh config
# used when NODE_MODE="node-join-master" or node-join-control-plane
#######################################################################

# +optional
# master ip means master node ip of cluster
MASTER_IP="y.y.y.y"

# +optional
# the user who can access master node, it can be empty
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

#######################################################################
# offline config
# used when offline install choose, must lift offline pkg first
#######################################################################

OFFLINE_INSTALL="false"

OFFLINE_PKG_PATH=""

v1.0.x

向集群添加工作节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.0

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

tip: 你可以通过预先下载离线包和镜像来减少部署时间 export PRE_DOWNLOAD="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入集群

MASTER_IP 为 master 节点 ip

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# if install k8s
INSTALL_KUBERNETES="true"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-master"

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="" #{ip}:{port} , dns

# master ip means master node ip of cluster
MASTER_IP="10.173.32.4"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
KUBERNETES_VERSION="1.20.9"

# +optional
# the user who can access master node, it can be empty
# when NODE_MODE="master" or "control-plane-master"
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
# when NODE_MODE="master" or "control-plane-master"
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

向集群的 control-plane 添加 master 节点

在新节点上执行部署脚本

KUBECUBE_VERSION=v1.0

export CUSTOMIZE="true";curl -fsSL https://kubecube.nos-eastchina1.126.net/kubecube-installer/${KUBECUBE_VERSION}/entry.sh | bash

设置脚本参数，并按照提示继续运行安装脚本并等待新节点加入 control-plane

MASTER_IP 需要填已有的 master 节点 ip
CONTROL_PLANE_ENDPOINT 为高可用 vip

# if install kubecube on pivot cluster
INSTALL_KUBECUBE_PIVOT="false"

# if install kubecube on member cluster
INSTALL_KUBECUBE_MEMBER="false"

# if install k8s
INSTALL_KUBERNETES="true"

# there are four node mode below:
# "master" : node will be installed as a master of cluster
# "node-join-master" : node will be install as a worker of cluster to join master
# "control-plane-master" : node will be installed as a master to control plane of cluster
# "node-join-control-plane" : node will be installed as a master to join control plane
NODE_MODE="node-join-control-plane"

# +optional
# must be set when INSTALL_KUBECUBE_MEMBER="true"
# this value is the name of member cluster you
# want to take over
MEMBER_CLUSTER_NAME=""

# +optional
# must be set when NODE_MODE="control-plane-master"
# or "node-join-control-plane"
CONTROL_PLANE_ENDPOINT="10.173.32.10" #{ip}:{port} , dns

# master ip means master node ip of cluster
MASTER_IP="10.173.32.4"

# +optional
# KUBECUBE_HOST must be set when as a member cluster to
# join pivot cluster, the value is pivot node ip
KUBECUBE_HOST=""

# zone has two choice
# 1. "cn" : in mainland
# 2. "others" : out of mainland
ZONE="cn"

# k8s version you want to install
KUBERNETES_VERSION="1.20.9"

# +optional
# the user who can access master node, it can be empty
# when NODE_MODE="master" or "control-plane-master"
SSH_USER="root"

# +optional
# the port specified to access master node, it can be empty
# when NODE_MODE="master" or "control-plane-master"
SSH_PORT=22

# +optional
# must be empty when ACCESS_PRIVATE_KEY_PATH set
# password for master user to access master node
ACCESS_PASSWORD=""

# +optional
# must be empty when ACCESS_PASSWORD set
# ACCESS_PRIVATE_KEY for master user to access master node
ACCESS_PRIVATE_KEY_PATH="/root/.ssh/id_rsa"

最后修改 April 11, 2023 : Release v1.8 doc (#57) (cbc6022b)